Coverings 2015

Coverings 2015Coverings, the largest tile and stone exhibition in North America, will return to Orlando in April to showcase cutting-edge product innovations and emerging trends in the marketplace. When the industry gathers at the Orange County Convention Center, April 14-17, attendees will be impressed with the latest product introductions presented by more than 1,000 exhibitors representing more than 40 countries.

“As the industry continues to innovate tile, reimagine everyday solutions, and present new material for architects, designers, builders, remodelers, distributors, retailers, installers, contractors and fabricators, one thing is certain: Coverings is the place you need to be to see it all,” said Alena Capra, Coverings Industry Ambassador. “Aside from the jam-packed expo floor, the show offers an exceptional conference program, certification courses, and networking opportunities. It is an exhilarating experience that has a lasting impact for all professionals in the industry.” (more…)

Continue Reading

CFI Training Events for 2015

CFI 2015 Training Events Calendar March 13-14, 2015 San Antonio, TX | Carpet March 25-26, 2015 Baltimore, MD | Wood & Laminate March 31-April 1, 2015 Ft. Wayne, IN | Ceramic March 31-April 1, 2015 Ft. Wayne, IN | Wood & Laminate April 2-3, 2015 Ft. Wayne, IN | Resilient April 2-3, 2015 Ft. Wayne, IN | Carpet April 10-11, 2015 Nashville, TN | Carpet April…

Continue Reading

Heat Welding Pro (dot com) Is Not A TFP Sponsor

The folks at Heat Welding Pro (dot com) sponsored a contest in 2014 and hosted a commercial vinyl flooring forum at The Floor Pro Community, but it was a short-lived relationship. I don't know why they still have a link to the expired contest and a broken link to our commercial flooring forum. Here is…

Continue Reading

Hello TFP Visitors!

Welcome to The Floor Pro Community. We are here to share information and resources to help the flooring professional and guide the Consumer/DIYer. The articles found below or through the menu above & from the categories listed in the navigation column will help you get started. Our biggest claim to fame is our Community Forums. Registration at TFP is always free. Consumers get the benefit of many thousands of years of combined experience. Pros get special privileges so that you will stick around to help other pros and our consumer/diy members. Enjoy your visit and please come back often.

Jim McClain, owner/admin The Floor Pro Community

Continue Reading

The Formula for Profiting On In-House Labor

This covers an aspect of business I have not heard much on around the various flooring sites. Perhaps you have and you may find this repetitive or boring. If so, my apologies. However, for those who have not, the point I hope to share comes from a pivotal point in my wife’s and my business becoming truly profitable. So here goes…

It would be easy to say the best formula for profit margins is to always have our income exceed our out-go. That’s really silly, it’s like saying the best way to avoid accidents is to not have them. You might need to read that sentence again. I know, it’s an obvious point. The problem is, doing the obvious is not always as easy as identifying it. (more…)

Continue Reading

SLC & Radiant Heat Flooring

Self-Leveling Cement & Radiant Heat Flooring When installing electric radiant heated flooring, you will find that every manufacturer has slightly differing recommendations in their installation guidelines. Following the manufacturer's recommendations for installing the wires or mats is important. Following their guidelines for installing tile directly over these mats generally leads to frustration and in many…

Continue Reading

VALUE – Where is it Found in Installation

For years the term value has been bandied about throughout the flooring industry, but when it comes to excellent installation where is the value?

Until recently the real value associated with installation of flooring products has only received lip-service from retailers trying to close a sale by consoling customers who’ve previously felt the sting of poorly installed products.

“Will it wrinkle, bubble . . . what happens if it starts to come up?” These are only some of the questions asked by concerned customers at the point of sale. Generally, the salesperson will answer, “Oh, our installers are the best and we provide full warranty.” However, being the best is not always reflected in an installer’s pay. Moreover, why would a salesperson say their installers are the best then go on to undo that thought by mentioning full warranty in the same sentence? (more…)

Continue Reading

Ultimate Scraper Blade’s Spud Bar Review

The Ultimate Scraper BladeThe Ultimate Scraper Blade was introduced to the industry in 2004 by Skirted Blade Systems LLC of Lake Tahoe, NV. It was a hit with all who saw and used it, but like any new tool in this industry, it was slow to gain wide acceptance. Shown and demonstrated at Surfaces, the CFI Convention and other flooring events and seminars, it finally made national distributors late that first year and was available in the UK by November. But it wasn’t until May of 2006 that their latest incarnation of the little blade that could made its debut, the Ultimate Scraper Blade Spud Bar. (more…)

Continue Reading

Tile Underlayment Positioning

Positioning Underlayment to Prevent Tile & Grout Cracks by Frank Woeste, P.E. and Peter A. Nielsen

The 2003–2004 Tile Council of America’s (TCA) Handbook for Ceramic Tile Installation contains numerous details for a double layer wood floor system supporting ceramic tile. The thicknesses of the subfloor and tile underlayment are given in each case. Specific guidance on where to butt the underlayment end joints is not given for any detail. For example, for F142-03, the TCA Handbook states, “offset end and edge joints of the underlayment panels by at least two inches from the joints of subfloor panels; they should not coincide with framing below.” It further states, “underlayment fasteners should not penetrate joists below.” In the case of F150-03, the offsetting is not mentioned, but it does state, “underlayment fasteners should not penetrate joists below.” The same holds true for F155; however, it also states, “face grain of plywood should run perpendicular to trusses, I-joists, or sawn lumber for maximum stiffness.”

The purpose of this article is to propose specific guidelines (more…)

Continue Reading
Close Menu